Studio
Cleaner takes, with less outside noise on the microphone
Mixes that translate, because the room stops colouring sound
Fewer noise complaints from neighbours about late sessions
A room built to recognised listening-room criteria
A studio needs isolation and tuned acoustics together
The right treatment fixes both at once. By isolating the room from outside noise and tuning its internal acoustics as one system, you get a space that sounds the same take after take, session after session — not one that's fighting you every time you hit record.
A studio has to solve two problems at once: keep the outside world out, and control what the inside actually sounds like. Get the isolation wrong and traffic noise turns up in a vocal take. Get the internal acoustics wrong and every recording carries a flutter or boom that no amount of mixing fully removes — there's no hiding either mistake once it's on the record.
Custom acoustic solutions for
Studio
Sound reasons for Acoustic
One contractor, start to finish
Survey, design and installation handled by our own team, and testing carried out with our testing partner, EMC Acoustics. One team stays accountable for the result, from the first site visit to the final sign-off.
Designed to a target
Every space gets an acoustic design modelled to a specific reverberation target, not a standard panel layout. Before-and-after acoustic measurement is available as a paid add-on, so the improvement can be proven, not just felt.
Isolation and treatment designed together
A studio needs two things at once: sound insulation that limits noise coming in and going out, and internal acoustics that stop the room colouring what you hear. We design both together, using recognised listening-room criteria such as EBU Tech 3276, so you record and mix in a room you can trust.
Independent on materials
We source from several manufacturers and are tied to none, so we specify what your space and budget actually need, not what one catalogue stocks.
What We Offer
Studio
Not sure what this space needs? Call us on +44 1908 880191 or book a free survey, and we'll come back to you with the next step.
We agree the speaker and listening positions with you first, then design absorption at the first reflection points and bass treatment in the corners, and specify the panels and bass traps. Our installation team fits the scheme, so the mix position is designed rather than left to chance.
A free site survey. An acoustician assesses the space and how it is used, and you receive a quotation and an AI-assisted acoustic report, with no obligation to go ahead.
Product placement, specifications and drawings your contractor can work from, designed around how the space is used. Free design on qualifying projects.
Send us drawings and photographs and we'll prepare an acoustic proposal with product recommendations and a quotation for supply and installation, free of charge.
Before-and-after acoustic measurement and compliance testing, carried out with our testing partner EMC Acoustics. This is a paid service, available on any project.
Trusted on schools, venues and landmark halls
How we reduce the noise
We specify a combination of absorption and diffusion tuned to how the room will be used — voice, music or broadcast — alongside isolation measures that stop outside noise bleeding into a take.
One team surveys, designs and installs — nothing gets lost between contractors
Every install is checked against the target spec before we call it done
Not tied to one manufacturer, so the product is chosen for your space, not our stock
Standards, finishes and installation
Your questions about this space, answered.
Yes. We specify isolation and internal absorption and diffusion as one system, because they affect each other. A well isolated room with poor internal acoustics still records badly, and a tuned room means little if outside noise leaks into every take.
Yes. Absorption and diffusion are specified against a target response for the intended use. A voiceover booth, a live room and a broadcast studio need different balances of reverberation and clarity, so we design each against its own brief.
Yes. Micro-perforated and printed panel finishes can look considered rather than industrial, while still doing the acoustic work. We discuss finishes with you early, because the look and the acoustic performance are specified together.
Yes. Custom acoustic solutions are engineered for irregular rooms that standard panel layouts cannot cover properly. We work from your dimensions or drawings and take account of the shape, its reflections and its resonances.
Yes, as a paid add-on. We can measure the finished room against your target specification, so you have data on its reverberation and background noise. Any remaining issues are then dealt with against measured results rather than by ear alone.
Too noisy? Let's talk silence.
Book a FREE site survey, and an acoustician will tell you exactly what your space needs. Rather talk first? Call +44 1908 880191.
